Neue Builders Packs und Wood Flatbed Kits bei Showcase Miniatures
Beiträge von gundi
-
-
Trainworx kündigt für das 3. Quartal 2017 einige neue Trucks an.
Diese Trucks entstanden in Zusammenarbeit mit einigen Modellbahnern die in ihrem Berufsleben jeweils einen dieser Trucks gefahren haben und ihre ganz private Geschichte damit verbinden.
Die Trucks müssen allerdings bis zum 31.Dezember vorbestellt werden.http://www.train-worx.com/16-11customtrucks.pdf
Hier die Storys die jeweils hinter diesen Trucks stecken. (Zitat Pat Sanders - Trainworx)
Vern Henderson 351 Logger
Part #55180
$37.95This 1956 Peterbilt 351 logger was owned by Wesley LaVern (Vern) Henderson of Pendleton Oregon. It had a 220 Cummins with 3x5 transmission. It received many paint jobs in its life, this is the final Vern Henderson paint scheme.
"I got to ride in this truck as a boy every once in a while, though my mom thought it was always too dangerous... some of my best memories of growing up. I distinctly remember my dad shifting the 'Brownie' gears with both hands and steering with his knee! Dad would have been proud to see his old truck as a model. He loved collecting 1:18 die cast 'old cars'--I have most of his collection of those still."(Gary Henderson)
John Zwergel Kenworth K100
Part #51081
$37.95This 1973 Kenworth K100 was owned by John Zwergel. It was set up with a 350 Cummins, 4.33 rears and Dayton wheels.
"I always had the Dayton wheels. I hauled mostly steel and watermelons and was usually overweight. I found the best tire for me was Michelin. Running in the south, the roads could get really hot and with Michelins I never blew a tire. This is stirring memories from probably the best time in my life."(John Zwergel)
John Patten Heavy Haul Pete
Part #57982
$37.95This custom heavy haul Peterbilt was owned by John Patten.
"The edited truth!! This custom heavy-haul Peterbilt owned John Patten! This yellow truck was my last 'Pete'. The drive-train was a CAT engine (well tuned) in front of a 6x4 transmission on a 300 inch wheelbase. Lots of heavy-haul power!!"(John Patten)
Mike Sabia Kenworth W900
Part #59083
$37.95Mike Sabia from New Jersey owned this custom KW with 3406 CAT engine. "ON MY STEEL HORSE I RIDE" is on the back of the sleeper. These are lyrics from (Bon Jovi, Wanted Dead or Alive). Wanted Dead or alive? There must be more to this story but Mike won't say.
"If you notice, it says "SECRET WEAPON" on the sleeper (my CB handle). NO PROBLEM! The reason I put that on the bug shield is I was a big fan of the comedy ALF in the '80's. If you remember, that was ALF's saying for everything. I also had a stuffed ALF doll hanging in the passenger side window."(Mike Sabia)Sandy Smith Peterbilt
Part #57984
$37.95This 1997 Peterbilt was specified for light weight with the highest horsepower possible and maximum longevity. The truck was owned and operated by Camionnette, Ltd. (camionnette, is a French word for little truck) which was a small fleet of tractor trailers, owned by Sandy and Kris Smith, hauling dry bulk Portland cement and other commodities.
"A Caterpillar C-13 (electronic 3306 engine) was used with a light weight 13 speed transmission and lighter weight drive line components all to save weight and increase payload. A "Day Bunk" 36 inch sleeper was specified along with smaller fuel tanks, and aluminum components from the front bumper to the cab. The weight savings added up to over 5000 pounds compared to a truck bought two years earlier. The smaller engine and lighter empty weight yielded 1 mile per gallon fuel economy over it's bigger brother with a Cat C-15 (3406) engine. The greater payload made this truck a financial winner even if it arrived at the concrete plant 10 minutes after it's sister truck with the larger engine. The truck accumulated over 980,000 miles prior to being sold and with no major engine repairs required and a rust free cab and frame structure."(Sandy Smith)
Mark Morris
Peterbilt 379
Part #57985
$37.95This beautiful 2001 blue Peterbilt 379 was bought new by Mark Morris in 2000. It is powered by a CAT 6NZ C15 engine. Custom work on the truck was performed by Truck Rods, part of Peterbilt of Joplin Missouri.
"Should never have traded it. The new owner has over 1 million miles on it. He keeps the truck in a heated barn during the winter." (Mark Morris)
-
Showcase Miniatures bringt vier neue Trucks in N
Der International Fire Truck in the 50s era wird wieder aufgelegt
https://www.showcaseminiatures…/n_scale_vehicles/34.html80s Brigadier Short Dump Truck
https://www.showcaseminiatures…/n_scale_vehicles/93.html50's 3100 Chevy Half Ton Flatbed Truck
https://www.showcaseminiatures…/n_scale_vehicles/94.html50s 3800 Chevy One Ton Flatbed
https://www.showcaseminiatures…/n_scale_vehicles/95.html -
Hallo Sven,
der gefällt mir richtig gut...
-
Sieht Toll aus!
Danke Sven
welche Grundfarbe hatte denn Dein Trainworx Peterbilt oder hast Du total "gestrippt" ?
Ich habe den UPS T800, in braun, daher meine Frage .Das war der weiss/schwarze dreiachsige Peterbilt 350
http://i.ebayimg.com/00/s/MzY5WDcxOA==/z/Mf8AAOSwXeJXdZq3/$_57.JPG?set_id=8800005007
aber ich habe ihn trotzdem, bis auf die Spiegel, zerlegt... Mit einem Skalpell und ein bisschen Vorsicht geht das ganz gut. Aber die Scheiben kannst Du nicht entfernen, weil die Cab ein kompletter Guß ist. Komplettlackierungen werden also schwierig. -
Hallo Rainer,
ich danke Dir...
und hoffe daß Du uns deine Modelle nicht vorenthältst, ich bin auf jeden Fall gespannt auf deine Arbeit.
-
Mal wieder was neues von meinem Arbeitstisch.
Peterbilt - Holmes Wrecker in 1:160.
Dieser Wrecker entstand aus einer Trainworx Zugmaschine und einem Athearn Abschleppwagen, beides wurde aneinander angepasst und umlackiert. Der Aufbau wurde etwas bearbeitet und mit Seilen, Ketten, einer Winde und ein paar Details aus der Bastelkiste ausgestattet.Mehr Bilder könnt ihr auf meinen Seiten bei Facebook oder flickr finden...
-
Hallo Rainer,
da bin ich mal gespannt... Halt mich mal auf dem Laufenden. -
Hallo Rainer,
soweit ich weiß bekommst Du die Kits bisher nur direkt bei Trainworx. -
Das kannst Du selber wählen. Du kannst bei jeder Cab auswählen ob Du eine Zwei- oder Dreiachsige Version bauen möchtest und welchen Sleeper Du verwenden möchtest.
-
Trainworx bietet seine Trucks jetzt auch als lackierte Bausätze an.
PDF Katalog
http://www.train-worx.com/truckparts.pdf
Online Katalog
http://www.train-worx.com/truckparts.htm -
Showcase Miniatures hat drei neue Trucks im Programm
- FL-M2 Liquid Propane Gas Truck
https://www.showcaseminiatures…/n_scale_vehicles/90.html- 70's GMC Holmes Wrecker (Short Hood)
https://www.showcaseminiatures…/n_scale_vehicles/91.html- 70's GMC Holmes Wrecker (Long Hood)
https://www.showcaseminiatures…/n_scale_vehicles/92.html -
Trainworx kündigt, rechtzeitig zum 4.Juli, drei neue Artikel in 1/160 an...
Einen PS2CD 4427 Covered Hopper im Bicentennial scheme,
einen Kenworth W900 VIT 200 mit einem N&W Bicentennial Trailer und
einen Kenworth K100 VIT 200 mit einem Western Pacific Bicentennial Trailer.Die Original 1976er Kenworth VIT 200 waren Bicentennial Trucks in einer Limited Edition. VIT (Very Important Trucker) und 200 (Limitiert auf 200 Trucks)
Aus diesem Grund hat Trainworx seine Modelle auch auf 200 Stück limitiert.Hier das Trainworx Video zu den Modellen: https://www.youtube.com/channel/UC1_9qKAwxGQcUmm3HeTCjMg
-
Das lässt mein Herz doch gleich höher schlagen...
Die sind dir wirklich gut gelungen. -
Showcase Miniatures hat den Kalmar Container Loader wieder im Programm
https://www.showcaseminiatures…/n_scale_vehicles/21.html -
Sind aber ein paar Modelle wie z.B. der Kenworth UPS, da wirst neidisch...
Die sehen echt klasse aus... Ich wollte mir erst keine zulegen, weil ich meine Sammelleidenschaft eigentlich auf Fire Trucks beschränken wollte und als Bastelgrundlage sind die mir zu teuer. Jetzt hab ich mir doch welche bestellt und ich ärgere mich dass ich mir keine Trucks der Movie-Truck Kollektion zugelegt habe... -
Classic Metal Works kündigt einige Neuheiten an, sowohl in 1:160 als auch in 1:87
http://classicmetalworks.com/n…ew-products/#!prettyPhoto -
Trainworx kündigt fünf neue Versionen des 53 foot Trailers an
http://www.train-worx.com/16-553trailer.pdf -
Showcase Miniatures hat jetzt zwei Versionen eines Wrecker auf dem International Harvester Loadstar aus den 60er Jahren in ihrem Programm, einmal mit geschlossener Motorhaube und einmal mit geöffneter...
https://www.showcaseminiatures…/n_scale_vehicles/88.html
https://www.showcaseminiatures…/n_scale_vehicles/89.html -
Showcase Miniatures hat den GMC 9500 aus den 70ern, je einmal mit short Hood und einmal mit long Hood, neu im Programm.
https://www.showcaseminiatures.net/n_scale/n_scale_vehicles/