Max. 2 Bar Druck. Und du machst ja HO denke ich. Da geht locker die 0,5mm Düse. 0,2mm ist schon sehr klein für solch große Flächen.
AXEL
Polly Scale Farben
- Acela
- Erledigt
-
-
Hm, ok. Wird auch mal probiert.
Ich muss eh neue Nadel und Düse besorgen.
Allerdings war ich mal extra auf die kleinen Düse umgestiegen, weil ich damit bessere Ergebnisse hatte.
Mag aber mit dem neuen Kompressor nicht mehr stimmen.
Danke für den Tip.
-
...das kam grade aus Übersee geschwappt:
AND A GREAT CRY ERUPTED FROM THE MASSES GATHERING IN THE SQUARE, AND THERE WAS MUCH GNASHING OF TEETH, AND THE SOUNDS OF SHOTGUN SHELLS BEING CHAMBERED ECHOED ACROSS THE LAND AS DARKNESS FELL UPON THE MODEL BUILDING WORLD: I received an e-mail from my sales representative at one of my larger distributors this morning; he was forwarding an e-mail from his management team to him. This is what they sent to him and he in turn sent to me:
“I received a call from Testor in advance of their formal announcement, which was actually good of them to do that:
“They are dropping these brands entirely:
“Pactra: all items under this brand, including R/C paints, trim tapes, etc
“Floquil: all items under this brand
“Pollyscale: All items under this brand
“We are not closing anything out at this time, we figure most of it will sell through in a natural progress.
“No other areas of their business are affected.
“This is public information, you can let your customers know this will happen.”
-
Wäre Mr. Spock jetzt hier, würde er fragen:
"Wäre dies nicht der Augenblick für eine farbige Metapher?"
-
- Leid tut mir nur um weathered Black, Tuscan, Roof Brown, Boxcar Red,, old + bright Silver (Ich red jetzt von Floquil) - die Farben haben gut gepasst und haben auch gut gedeckt. Die ganzen Rot und Gelb Töne, sowie Pullman Green waren sowieso mit Vorsicht zu geniessen. Werd halt jeweils ein paar Dosen einlagern wenn ich noch welche kriege.
Danke für die Warnung.
-
Da hat wohl jeder so seine eigene Liste, Gerold.
Bei mir wären es u.a. engine black, weathered black, box car red und Milwaukee orange, das man mir als traction orange empfohlen hatte.
Da ich mit letzterer eh gerade die Probleme hatte, werde ich da gar nicht neu probieren sondern gleich auf andere Farben umsteigen.
-
Jörg, grad mit Orangetönen hatte ich kein Glück. Die Meinungen gehen ja auch drüben auseinander, was "Traction Orange" am besten entspricht - mest wird SP Daylight Orange , oder Reefer Orange empfohlen. Wobei Milw und GN Orange auch nicht viel anders ausschauen sollten. Leider passen alle genannten Farben von Floquil seit dem Bann von Schwermetallen ( Cadmium, Blei) nicht mehr - umso frustrierender, als sie in den 90er Jahren perfekt waren.
Hab ein paar Sachen (Milw, SP ) mit Badger lackiert - bin nicht 100% glücklich, bin noch auf der Suche nach Alternativen. -
Ich arbeite gerne mit den Elita-Farben.
Die sind allerdings nach RAL gemischt.
Als traction orange will ich mir nun eine 1:2 Mischung von RAL 2004 und RAL 2005 machen.
Das dürfte vom Gefühl her hinkommen.
-
Hier nochmal ein offizielles Statement:
There are many changes taking place at The Testor Corporation. For over
80 years, we have provided premium paints and finishing systems to the craft and hobby industry. Recently we announced that we are transforming our business in order to more effectively address the changing needs of our consumers and their interests.
We ve made the decision to exit the following businesses within the Testor Brand family - Pactra , Floquil , PollyScale , and ColorArtz .
This will enable The Testor Corporation to return to our foundation of success providing premium, innovative product that inspires creativity. We will continue to accept orders and ship product for a limited time based on available quantities.
Going forward, the following brands will be critical to our success and development - Testor , Model Master , and Aztek . These brands will be infused with marketing support, innovation and operational efficiencies.
In support of this, we have announced a consolidation of operations at our Rockford facilities. Our commitment to the Testor brand has never been stronger. By implementing these changes, and the ability to leverage all of Rust-Oleum s world class services, we are more strongly poised to take our business to the next level through product and merchandising innovations, and increased customer understanding.
If you have further questions, please feel free to let us know.
We appreciate your business!!
Best Regards,
Beth
The Testor Corporation
Consumer Affairs Department
1-800-837-8677 (1-800-testors)
M-F 8:00 A.M - 4:00 PM CST
Ich werde mich noch kräftig mit den gängigsten Farben eindecken und dann mal sehen, wenn die alle sind. Eigentlich war ich immer sehr zufrieden. Einige Töne muss man anmischen, aber manch andere waren sehr gut getroffen...
-
Erinnert mich an das böse Wort vom Heuschreckenkapitalismus. Wenn alles leergefressen ist, zieht man weiter.
-
Going forward, the following brands will be critical to our success and development - Testor , Model Master , and Aztek . These brands will be infused with marketing support, innovation and operational efficiencies.
Aztek(-Farbe) scheint mir ein Nischenprodukt zu sein, Model Master(-Farbe) richtet sich ganz klar an Militärmodellbauer. (Model Master wird von Pelle Soeborg verwendet. Jedenfalls empfiehlt er es in seinen Büchern zum weathern.) Und unter Testors verbleiben hauptsächlich Email(Enamel)-Farben. Ein erstaunlicher Schritt.In support of this, we have announced a consolidation of operations at our Rockford facilities.
Hört sich an wie "Entlassungen". -
Testors scheint doch Railroad-Farben in seine verbleibenden Programme aufzunehmen:
Acrylics: http://www.testors.com/category/137370/Railroad_Acrylics
Enamels: http://www.testors.com/category/137236/Railroad_Enamels
Gruß, Volker
-
Bist du dir da sicher ?
Auf den Gläschen der Acrylics steht Polly Scale .
Und das ist die Farbreihe, die eingestellt werden soll.
-
Bist du dir da sicher ?
Nein, deshalb habe ich ja "scheint" geschrieben. Allerdings ist Website neu geordnet. Ich hoffe, dass meine Annahme richtig ist. Ich bin durch das Juni Model Railroad Hobbyist Magazin darauf aufmerksam geworden.
Aus dem Model Railroader Forum folgendes Zitat: http://cs.trains.com/mrr/f/88/p/217834/2406002.aspx#2406002
"First email from Testor ----------------------------------
Thank
you for taking the time to write us regarding your disappointment with
the decision to discontinue the Military colors in our Floquil
Pollyscale line.
Due to the low sales and the difficult economy, the
decision was made to close down the line since we have the same Military
colors in our Model Master Line.
We apologize for the inconvenience
this has caused you and thank you for your dedication in using Testor
products and we hope that we can continue to be the supplier for your
Hobby needs.Second email from Testor -------------------------------
We
are only discontinuing the pollyscale military line the floquill
railroad colors and the pollyscale railroad colors will still be
available.
You should keep the following in your files for any
future use.Testors Customer Service Department
1-800-837-8677 (1-800-testors)
M-F 8:00 A.M - 5:00 PM CST"Das erklärt vielleicht die Polly Scale Fläschchen.
Sollte es nicht stimmen, hier sind zwei Links, die eventuell mit Farbvergleichen helfen können:
http://downloads.hobbico.com/m…ell_Paint_Match_Guide.pdf Ein Farbabgleich Revell - Polly Scale - Model Master der mit Hilfe von Testors entstanden ist.
Unter dem Link http://cs.trains.com/mrr/f/88/t/218231.aspx
im Model Railroader Forum findet sich ein Post von Sh00fly (Chris Palomarez von Microscale) mit einer Tabelle mit guten Annäherungen für Floquil Farben.
Gruß, Volker -
Nun blick ich gar nicht mehr durch :wacko::wacko:
Nach deren zweiter email bleiben die railroad colors.
Dagegen spricht aber dieser Text aus facebook:
Zitat:
"Many of you have expressed disappointment regarding our decision to exit Floquil and Polyscale. Decisions such as these are never easy. Trends in model railroading have changed over time.
Creating product for weathering and scenery has been more of the focus as train cars have moved to pre-decorated. The good news is that the same great products for weathering and scenery can be found in Testor's CreateFX line that is available now.
Please check your local hobby shop or http://www.testors.com and search CreateFX for information regarding this product line."Zitat Ende
-
Nun blick ich gar nicht mehr durch
Da sind wir dann schon zwei
Deshalb auch für alle Fälle die beiden Links.
Gruß, Volker -
-
Sehr gut
-
Leider keine Pensyfarben in der Tabelle
-
Unter dem Link http://cs.trains.com/mrr/f/88/t/218231.aspx
im Model Railroader Forum findet sich ein Post von Sh00fly (Chris Palomarez von Microscale) mit einer Tabelle mit guten Annäherungen für Floquil Farben.Im obigen Link befindet sich die gleiche Tabelle. Sie wurde gegenüber der Tabelle auf Microscale um einige Farben, u.a. Milwaukee, ergänzt. Ich denke, auf der Microscale Website wird sie dann auch bald ergänzt, da sie ja von einem Microscale Mitarbeiter stammt.
Pennsy kommt vielleicht noch, die Tabelle soll ja laufend ergänzt werden.
Gruß, Volker
Jetzt mitmachen!
Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!